Criteria

Text:
Sector:
Content:
Display:

Results

Viewing 31 to 60 of 677
2017-01-15
Book
Greg Barnett
Battery Fires: Why They Happen and How They Happen was written to assist those interested in this type of incident understand how automotive fires develop, spread and the damage they cause, using both deductive and inductive reasoning. The main focus of the book resides in looking at differences in failure modes between DC and AC systems, general types of battery and electrical failure modes leading to fire, how to interpret electrical fire, determination of the primary failed part, and other skills the investigating engineer will require to perform technical failure mode analysis. However, some fires have consumed the evidence to the point where a determination cannot be made with any degree of certainty. In this instance, evidence will be quite limited, and the analysis will have its limitations and should be included in the discussion as such. In some cases, a “cause undetermined” report is all the evidence will support.
2016-12-22
Book
Jay Meldrum
This collection is a resource for studying the history of the evolving technologies that have contributed to snowmobiles becoming cleaner and quieter machines. Papers address design for a snowmobile using E10 gasoline (10% ethanol mixed with pump gasoline). Performance technologies that are presented include: • Engine Design: application of the four-stroke engine • Applications to address both engine and track noise • Exhaust After-treatment to reduce emissions The SAE International Clean Snowmobile Challenge (CSC) program is an engineering design competition. The program provides undergraduate and graduate students the opportunity to enhance their engineering design and project management skills by reengineering a snowmobile to reduce emissions and noise. The competition includes internal combustion engine categories that address both gasoline and diesel, as well as the zero emissions category in which range and draw bar performance are measured.
2016-12-01
Book
Kenneth Hummel
Actuators are the key to allowing machines to become more sophisticated and perform complex tasks that were previously done by humans, providing motion in a safe, controlled manner. As defined in this book, actuator design is a subset of mechanical design. It involves engineering the mechanical components necessary to make a product move as desired. Fundamentals of Engineering High-Performance Actuator Systems, by Ken Hummel, was written as a text to supplement actuator design courses, and a reference to engineers involved in the design of high-performance actuator systems. It highlights the design approach and features what should be considered when moving a payload at precision levels and/or speeds that are not as important in low-performance applications.
2016-12-01
Book
Pawel M. Kurowski
Finite Element Analysis (FEA) has been widely implemented by the automotive industry as a productivity tool for design engineers to reduce both development time and cost. This essential work serves as a guide for FEA as a design tool and addresses the specific needs of design engineers to improve productivity. It provides a clear presentation that will help practitioners to avoid mistakes. Easy to use examples of FEA fundamentals are clearly presented that can be simply applied during the product development process. The FEA process is fully explored in this fundamental and practical approach that includes: • Understanding FEA basics • Commonly used modeling techniques • Application of FEA in the design process • Fundamental errors and their effect on the quality of results • Hands-on simple and informative exercises This indispensable guide provides design engineers with proven methods to analyze their own work while it is still in the form of easily modifiable CAD models.
2016-11-09
Book
This title includes the technical papers developed for the 2016 Stapp Car Crash Conference, the premier forum for the presentation of research in impact biomechanics, human injury tolerance, and related fields, advancing the knowledge of land-vehicle crash injury protection. The conference provides an opportunity to participate in open discussion about the causes and mechanisms of injury, experimental methods and tools for use in impact biomechanics research, and the development of new concepts for reducing injuries and fatalities in automobile crashes. The topics covered this year include: • Head/brain biomechanics • Thorax, spine, and pelvis biomechanics • Foot-Ankle Biomechanics • Injury and effect of directional impacts • Pedestrian and cyclist injury factors and testing • Commercial truck and pedestrian accidents factors and testing
2016-09-18
Book
Thomas Zurawka, Joerg Schaeuffele
Since the early seventies, the development of the automobile has been characterized by a steady increase in the deploymnet of onboard electronics systems and software. This trend continues unabated and is driven by rising end-user demands and increasingly stringent environmental requirements. Today, almost every function onboard the modern vehicle is electronically controlled or monitored. The software-based implementation of vehicle functions provides for unparalleled freedoms of concept and design. However, automobile development calls for the accommodation of contrasting prerequisites – such as higher demands on safety and reliability vs. lower cost ceilings, longer product life cycles vs. shorter development times – along with growing proliferation of model variants. Automotive Software Engineering has established its position at the center of these seemingly conflicting opposites.
2016-09-12
Book
Lev Klyatis
The ability to successfully predict industrial product performance during service life provides benefits for producers and users. This book addresses methods to improve product quality, reliability, and durability during the product life cycle, along with methods to avoid costs that can negatively impact profitability plans. The methods presented can be applied to reducing risk in the research and design processes and integration with manufacturing methods to successfully predict product performance. This approach incorporates components that are based on simulations in the laboratory. The results are combined with in-field testing to determine degradation parameters. These approaches result in improvements to product quality, performance, safety, profitability, and customer satisfaction.
2016-09-01
Book
Honda's October 2016 R&D Technical Review features cutting-edge developments and new ways of solving engineering problems from Honda's worldwide engineering teams. This edition brings 15 technical papers and provides featured topics that include: • Development of High-output, Portable External Power Output System • Developments for CLARITY FUEL CELL • Research on Production of Cellulosic Ethanol
2016-09-01
Book
Jon M. Quigley, Roopa Shenoy
Project Management for Automotive Engineers: A Field Guide was developed to help automotive engineers be better project managers as automotive projects involve suppliers dispersed across the globe, and can often span multiple years. Project scope change is common, and so too are the budget constraints and tight deadlines. This book is an excellent guide on how to manage continuous change. As project management in this particular industry is intrinsically linked to product development, the chapters focus on the project management aspects that are significant during the various stages of a product development cycle, including business case evaluation, process development cycle, test phases, production ramp up at the plant and at the Tier 1 supplier level, and how to work within a matrix-structured organization. The principles of value projects and how to revive failing projects are discussed.
2016-07-14
Book
EXCLUSIVE MEMBER BENEFIT: 2016 MOBILITY ENGINEERING PROFESSIONAL SALARY SURVEY AND CALCULATOR Gain better insight into compensation practices: this salary survey is the only study its kind to explore levels and changes in compensation and employment for engineers and technical employees in the automotive, aerospace, and commercial vehicle industries. It benchmarks compensation levels based by geography, education, industry sector, experience, and managerial and budgetary responsibility. The full report is available to SAE International members by signing into your My SAE account and downloading it into your My Library area. Members also have full access to the updated online interactive salary calculator by visiting SAE’s website. Become a member of SAE International to access this exclusive benefit for free, or purchase it today. YOU BELONG HERE. Membership helps you succeed both personally and professionally. Join us today.
2016-07-01
Book
This over view of the subject analyzes automotive cybersecurity threats that are gaining attention worldwide and the apparent ways industries are responding to them. It also addresses the need to continue investment in cyber research and security, as well as the ‘security by design’ approach that automakers are likely to adopt as a long-term strategy to fend off cyber-attacks.
2016-06-15
Book
John Turner
Modeling and simulation of batteries, in conjunction with theory and experiment, are important research tools that offer opportunities for advancement of technologies that are critical to electric motors. The development of data from the application of these tools can provide the basis for managerial and technical decision-making. Together, these will continue to transform batteries for electric vehicles.
2016-05-16
Book
Ahmad A. Pesaran
This research focuses on the technical issues that are critical to the adoption of high-energy-producing lithium Ion batteries. In addition to high energy density / high power density, this publication considers performance requirements that are necessary to assure lithium ion technology as the battery format of choice for electrified vehicles. Presentation of prime topics includes: • Long calendar life (greater than 10 years) • Sufficient cycle life • Reliable operation under hot and cold temperatures • Safe performance under extreme conditions • End-of-life recycling To achieve aggressive fuel economy standards, carmakers are developing technologies to reduce fuel consumption, including hybridization and electrification. Cost and affordability factors will be determined by these relevant technical issues which will provide for the successful implementation of lithium ion batteries for application in future generations of electrified vehicles.
2016-04-15
Book
The introduction of 48-volt technology enables traditionally parasitic applications that run off the engine to be replaced with electrically driven systems, resulting in improvements in performance and efficiency. In the first of a series of reports produced jointly by ABOUT Automotive and SAE International, this comprehensive Executive Report analyses major engineering challenges facing the industry, and the solution strategies key players are beginning to adopt.
2016-04-08
Book
In “Dynamic Wireless Charging Technology”, NextEnergy in Detroit, Michigan explains the difference between static and dynamic electric vehicle charging, and a professor from the Korea Advanced Institute of Science and Technology describes their experience with dynamically charging buses already in use in their campus. This episode highlights: • The technology allowing vehicles to be charged while in motion, through wireless power transfer • Why this type of technology will help make vehicles more efficient and easier to charge, as they will require smaller batteries • How the OLEV (Online Electric Vehicle) works following the trail of power transmitting coils
2016-04-08
Book
In “Simulation Tools for Engine Design” engineers from Ricardo Software discuss the use of simulation software in new powertrain development. Another engineer, this time from General Motors, talks about how simulation tools helped them solve the challenge of fuel flow reversion while designing the new turbocharged Cadillac V6 engine. This episode highlights: • The challenge of simulating complex and combined systems in one vehicle • An example of how a library of components in a software package can be chosen to form a specific system and analyzed • How computational fluid dynamics simulation tools were used to help redesign a new planum
2016-04-08
Book
In “The Impact of Additive Manufacturing in Automotive Applications”, a professor from Kettering University explains why additive manufacturing will be a game changer for car makers, and how process control is one of the biggest challenges ahead. An engineer at Local Motors in Arizona shows how the company builds its cars using a large-scale 3D printer, including how a variety of materials is being evaluated for optimal performance in this type of application. The episode highlights: • The expected positive impact of AM on smaller car makers and suppliers • The key difference between small 3D printers and large-scale ones • The need to find the best possible material combination so vehicles that are #D-printed are as safe as traditional ones
2016-04-08
Book
In “Using Turbocharging in New Engine Design” (9:23), engineers from Schaeffler Group USA and McLaren Performance Tech explain what turbocharging is, and what it can do to improve both the power output of an engine and its fuel efficiency. Another engineer from the General Motors Powertrain group talks about how turbocharging was used in the new engine design for the Cadillac CT6. This episode highlights: • The lessons learned from when turbocharging was first used to help heavy-duty trucks go uphill • The experience acquired from car racing using turbo-charged engines • The advantages of using turbo charging to decrease the size of engines without losing power output
2016-04-01
Book
Honda's April 2016 R&D Technical Review features cutting-edge developments and new ways of solving engineering problems from Honda's worldwide R&D teams. This edition brings 23 technical papers and provides featured topics that include: • Development of New Fuel Cell Vehicle CLARITY FUEL CELL • Development of RC213V-S • Introduction of Heat Exchanger Production Technique for Stirling Engine Using Additive Manufacturing
2016-03-07
Book
Richard Van Basshuysen, Fred Schaefer
More than 120 authors from science and industry have documented this essential resource for students, practitioners, and professionals. Comprehensively covering the development of the internal combustion engine (ICE), the information presented captures expert knowledge and serves as an essential resource that illustrates the latest level of knowledge about engine development. Particular attention is paid toward the most up-to-date theory and practice addressing thermodynamic principles, engine components, fuels, and emissions. Details and data cover classification and characteristics of reciprocating engines, along with fundamentals about diesel and spark ignition internal combustion engines, including insightful perspectives about the history, components, and complexities of the present-day and future IC engines.
2016-03-01
Book
Craig Smith
Modern cars are more computerized than ever, with the aim to make driving more convenient. But vehicle technologies haven’t kept pace with today’s more hostile security environment, leaving millions vulnerable to attack. This handbook will give you a deeper understanding of the computer systems and embedded software in modern vehicles. It begins by examining vulnerabilities and providing detailed explanations of communications over the CAN bus and between devices and systems. With an understanding of a vehicle’s communication network, you’ll learn how to intercept data and perform specific hacks to track vehicles, unlock doors, glitch engines, flood communication, and more.
2016-02-19
Book
David Wood
Alternative propulsion technologies are becoming increasingly important with the rise of stricter regulations for vehicle efficiency, emission regulations, and concerns over the sustainability of crude oil supplies. The fuel cell is a critical component of alternative propulsion systems, and as such has many aspects to consider in its design. Fuel cell electric vehicles (FCEVs) powered by proton-exchange membrane fuel cells (PEFC) and fueled by hydrogen, offer the promise of zero emissions with excellent driving range of 300-400 miles, and fast refueling times; two major advantages over battery electric vehicles (BEVs). FCEVs face several remaining major challenges in order to achieve widespread and rapid commercialization. Many of the challenges, especially those from an FCEV system and subsystem cost and performance perspective are addressed in this book.
2016-01-01
Book
“Spotlight on Design” features video interviews and case studies, focusing on technology breakthroughs, hands-on testimonials, and the importance of fundamentals. Viewers are virtually taken to industry labs and research centers to learn how design engineers solve real-life problems. These challenges include enhancing product performance, reducing cost, improving quality and safety, while decreasing environmental impact, and achieving regulatory compliance. In the episode “Automotive Charging Infrastructure: Vehicle and Grid Integration” (21:00), engineers from NextEnergy and an infrastructure expert from General Motors explain how technologies are rapidly converging to power electric vehicles and support the overall electric grid.
2016-01-01
Book
“Spotlight on Design” features video interviews and case studies, focusing on technology breakthroughs, hands-on testimonials, and the importance of fundamentals. Viewers are virtually taken to industry labs and research centers to learn how design engineers solve real-life problems. These challenges include enhancing product performance, reducing cost, improving quality and safety, while decreasing environmental impact, and achieving regulatory compliance. In the episode “Engine Development for Performance and Efficiency” (22:00), engineers from Ricardo and General Motors explain the importance of lessons learned on the race tracks, how using the appropriate design and simulation tools expedite development, and present the new testing frontiers now available with 3D printing.
2016-01-01
Book
Solar Energy Harvesting: How to Generate Thermal and Electric Power Simultaneously describes energy harvesting using a hybrid concentrating photovoltaic (PV) system with simultaneous thermal generation for energy storage. Several designs have been proposed to build a system that takes advantage of the entire solar spectrum through direct electric generation using concentrated light onto photovoltaics while generating thermal energy using wavelengths of light not captured by the PV cell. This title addresses the current technologies and state-of-the-art designs, as well as the methodologies, underlying physics, and engineering implications.
2016-01-01
Book
Experimental and Simulation Tools for Thin-Film Solar Cells describes the methods used for the optical characterization and design of thin-film solar cells. A description of the cells under study (CdTe, CIGS, CZTS, Perovskite, and organic) is given, followed by coupling experimental and simulation studies in order to improve solar cell performances. A detailed discussion on specific optical tools (ellipsometry, photoluminescence and photoreflectance) is included, and a link between materials and measurements is made by studying the relevant physical principles. Finally, a numerical model is provided that can be used to design the structure of a thin-film solar cell.
2016-01-01
Book
"Spotlight on Design" features video interviews and case studies, focusing on technology breakthroughs, hands-on testimonials, and the importance of fundamentals. Viewers are virtually taken to industry labs and research centers to learn how design engineers solve real-life problems. These challenges include enhancing product performance, reducing costs, improving quality and safety, while decreasing environmental impact, and achieving regulatory compliance. In the episode "Additive Manufacturing: 3D Printing in the Automotive Industry" (20:00), engineers from Fiat Chrysler Corporation (FCA) explain the importance of using 3D printing to test multiple design scenarios and develop solutions that can be quickly evaluated on test tracks. And Local Motors shows how it builds a vehicle from the ground up with a 3D printer, and without a traditional assembly line.
2015-12-31
Book
Alex Krulikowski
The ISO GPS Ultimate Pocket Guide explains the most common rules, symbols, and concepts in the ISO Geometrical Product Specifications System. Written by standards expert Alex Krulikowski, this valuable on-the-job reference clarifies how to interpret standard-compliant technical drawings that use ISO 1101:2012 and its companion published standards. More than 15 standards were directly reviewed and more than 30 standards indirectly used in creating the book. One entire section is devoted to a quick comparison of ASME and ISO standards. Author's comments throughout the text provide insights about concepts and how to apply or interpret tolerancing in a cost-effective manner. Drawing interpretation is simplified because the tolerancing information is in one place, logically arranged, with illustrations of each concept.
2015-12-30
Book
Thomas Christian Schuetz
The detailed presentation of fundamental aerodynamics principles that influence and improve vehicle design have made Aerodynamics of Road Vehicles the engineer’s “source” for information. This fifth edition features updated and expanded information beyond that which was presented in previous releases. Completely new content covers lateral stability, safety and comfort, wind noise, high performance vehicles, helmets, engine cooling, and computational fluid dynamics.
2015-12-18
Book
Y Charles Lu, Srikanth Pilla
With their high specific strength and stiffness, composites have the potential to significantly lower the vehicle weight, which can have a dramatic effect on improving fuel efficiency and reducing greenhouse gas emissions. For the past decade or so, composites have been experiencing several transitions, including the transition from micro-scale reinforcement fillers to nano-scale reinforcement fillers, resulting in the nanocomposite. The effectiveness of the nano-sized fillers in composites can be explained by one of their unique geometric properties: the length-to-thickness aspect ratio. Therefore, nano-sized fillers have exceptionally higher reinforcing efficiency than the conventional, large fillers. The effectiveness of the nano-sized fillers in composites is also due to their large surface area and surface energy.
Viewing 31 to 60 of 677